Serie ME 300-800 FI - foot-operated, automatic impulse sealing machine for sealing bags with following characteristics:
Maximum width of sealing: 450 mm;
Sealing time: 1,0 - 8,0 sec;
Stand and pad for products;
Power: 600W, 220V...
Foot-operated sealing machine for sealing bags. These special foot sealers are excellent for sealing polycello films, humidity-proof cellophane film, polyethylene film, aluminum foil coated bags and gusset bags.
"CFN" model equipped with Timing Light & Signal to notify operator that foot should be removed from pedal and sealing is complete.
Hot stamp imprinter is optional...
Pedal impulse sealing machine for sealing bags.
This sealer is designed for vertical heavy-duty sealing; to be linked to dosing and filling systems. Double sides sealing is suited for heavy-duty bags with max width of 10mm. Vertical seals preventing loose products like powders and liquids from spilling when sealing...
Automatic impulse sealing machine for sealing bags.
Powder coated - high resistance to external influences coverage;
Aluminum jaws - especially for working with food;
Adjusting sealing temperature according to the type of the product;
Adjusting the range of closing the jaws...
Intelligent NEW technologies: SMPS with DTM system The machine is using SMPS (Switched Mode Power Supply) and DTM (Digital Temperature Measurement) technology for sealing. The proper sealing temperature can be realized and kept precisely during the whole sealing method. Even though the cooling cycle is temperature controlled sealing surroundings are kept under pressure until the end of the cooling..
Intelligent NEW technologies: ACC system Any parameters of sealing, vacu - uming, air blowing or gas flushing can be set and controlled by ACC (Active Cycle Control system) inde - pendently of each other. Using the ACC System sealing will be validated (quali fied). Due to the system, every sealing process can be realized and repeated in finitely by the same pa - rameters.
MSB technology ( Modul..
Revolutional unique technical solution! One type of machine can be equipped with 5 different size of sealing bars, 820, 1020, 1320, 2220 and 2620 mm.
Advantages of the machine:
Vacuum level can be adjusted by pressure (kPa) or by time (time unit: 0.1 sec.). The integrated vacuum sensor is detacting the vacuum level.
The vacuum and gas cycle can be repeated several times after each other..